Bases, Uprights, and Drape Supports

This Item Available in Our Online Store. Click Here! Click Here to Get a Quote on All Quik Stage Products Click Here to Print Our Pipe and Drape Brochure

Bases

Quik Stage pipe and drape is a quick and easy plus cost effective way to set up temporary or portable walls, room dividers, backdrops, trade show booths. We offer two different type of connecting hardware to connect your uprights to your bases and they are Slip Fit and Screw Fit. Slip fit is the most commonly use type and the one we sell the most of and uses a 1½" or 2" diameter pin or nipple that the upright pole slides over. The screw fit is exactly that, where you screw the upright pole into the base and some end users prefer it as it uses less storage space but it takes slightly longer to set up. See additional details below on both systems.

Slip Fit - "The Time Saver System". The main advantage of the Slip Fit System is that it can be set-up very quickly, especially when used in conjunction with storage carts. This system uses a pin or nipple that is attached to the slip fit base. The upright slides quickly and easily over the nipple. Every base is punched with 3 counter sunk holes so that the nipple can be positioned in the center of the base or at either edge. All bases now have a stacking slot allowing the bases to be stagger stacked, to save more storage room. The slip fit bases are zinc plated silver.

Screw Fit - "The Space Saver System". The screw-in system utilizes a threaded nipple that is riveted into the bottom of the upright. Every base is manufactured with two extruded holes, one in the center of the base and one at the edge. The extruded hole guides the upright into the threaded hole. The second hole is useful when uprights are placed next to a wall. The nipples are attached to the upright with four steel rivets and are designed to be replaced in the field by you with simple hand tools if ever damaged. The screw fit base was designed with dimpled corners that allow the bases to be stacked. If storage space is a problem for you, then consider the screw fit system. Screw fit bases are powder coated black.

There are two types of connecting systems to connect your uprights to your bases. Slip Fit and Screw Fit.

Slip Fit - "The Time Saver System". The main advantage of the Slip Fit System is that it can be set-up very quickly, especially when used in conjunction with storage carts. This system uses a special nipple that is attached to the slip fit base. The upright slides quickly and easily over the nipple. Every base is punched with 3 counter sunk holes so that the nipple can be positioned in the center of the base or at either edge. The 16" x 14" base and the 8" x 14" base have a stacking slot allowing the bases to be stagger stacked, to save more storage room. The 24" x 24" base does not have a stacking slot. The slip fit bases are zinc plated silver.

Screw Fit - "The Space Saver System". The screw-in system utilizes a threaded nipple that is riveted into the bottom of the upright. Every base is manufactured with two extruded holes, one in the center of the base and one at the edge. The extruded hole guides the upright into the threaded hole. The second hole is useful when uprights are placed next to a wall. The nipples are attached to the upright with four steel rivets and are designed to be replaced in the field by you with simple hand tools if ever damaged. The screw fit base was designed with dimpled corners that allow the bases to be stacked. If storage space is a problem for you, then consider the screw fit system.

Slip Fit Bases
Item # Specifications Weight
B507 8" x 14" Slip Fit Base for Uprights 3' to 4' Includes 3" x 1½" Diameter Nipple. Zinc Plated. 6.0 lbs
B505 16" x 14" Slip Fit Base for Uprights 5' to 8' Includes 3" x 1½" Diameter Nipple. Zinc Plated. 10.5 lbs
B518 18" x 18" Slip Fit Base for Uprights 8' to 12'. Includes 6" x 1½" Diameter Pin or Nipple. Zinc Plated. 29.0 lbs
B504 24" x 24" Slip Fit Base for Uprights 9' and Over Includes 6" x 1½" Diameter Nipple. Zinc Plated. 29.0 lbs

Screw Fit Bases
Item # Specifications Weight
B503 11" x 11" Screw Fit Base for Uprights 3' to 4' Black Powder Coated 6.5 lbs
B502 15" x 15" Screw Fit Bases for Uprights 5' to 8' Black Powder Coated 11.2 lbs
B501 24" x 24" Screw Fit Base for Uprights 9' and Over Black Powder Coated 29.0 lbs

Uprights

Quik Stage offers two types of uprights, Fixed Height or Telescoping. Both options are available in Slip Fit or Screw Fit to easily connect to your slip fit or screw fit base. Fixed height allows you to use it at one height only, but is your best value if you only need one height. Upright extensions are also available in 2' increments for the fixed uprights to increase the height. Telescoping uprights offer you the option of multiple heights and adjust in 1' increments and feature a double-button system plus a locking clamp that prevents collapsing.

Slip Fit - "The Time Saver System". The main advantage of the Slip Fit System is that it can be set-up very quickly, especially when used in conjunction with storage carts. This system uses the pin or nipple that is attached to the slip fit base and the upright slides quickly and easily over it.

Screw Fit - "The Space Saver System". The screw-in system utilizes a threaded nipple that is riveted into the bottom of the upright. You simply screw the screw fit upright into the screw fit base and that's it.

Uprights are all aluminum and are manufactured from high quality 6063-T-6 aluminum tubing and are produced to an exact specification and hardened to yield a Webster rating of 14. Uprights feature an extra heavy duty 0.65 wall thickness and each upright is inspected for fit and function. Each upright is finished with a clear anodize process to protect your drapes from damage. All fixed height uprights over 3' high are slotted at 3' up from the base and on the top on all 4 sides to accept the drape support. 3' uprights are only slotted on the top. The slots located 3' up are for side rails and used when making trade show booths for example. Custom slot locations can also be added to meet your specifications for an additional charge.

Fixed Height Uprights
Item # Specifications Weight
B105 3 ft Screw Fit Upright with Slots at 3 ft & 8 ft & Chrome Cap 1.4 lbs
B106 3 ft Slip Fit Upright with Slots at 3 ft & 8 ft & a Chrome Cap 1.0 lbs
B103 6 ft Screw Fit Upright with Slots at 3 ft & 6 ft 2.4 lbs
B104 6 ft Slip Fit Upright with Slots at 3 ft & 6 ft 2.0 lbs
B101 8 ft Screw Fit Upright with Slots at 3 ft & 8 ft 3.1 lbs
B102 8 ft Slip Fit Upright with Slots at 3 ft & 8 ft 2.7 lbs
B107 10 ft Screw Fit Upright with Slots at 3 ft, 8 ft & 10 ft 5.0 lbs
B108 10 ft Slip Fit Upright with Slots at 3 ft, 8 ft & 10 ft 4.8 lbs

Telescoping Uprights
Item # Specifications Weight
B201 6 ft to 8 ft Telescoping Upright with Stops at 7 ft & 8 ft 4.2 lbs
B202 6 ft to 8 ft Telescoping Upright with Stops at 7 ft & 8 ft 3.8 lbs
B203 8 ft to 14 ft Telescoping Upright with Stops at every foot from 8 ft to 14 ft 5.0 lbs
B204 8 ft to 14 ft Telescoping Upright with Stops at every foot from 8 ft to 14 ft 4.8 lbs
B205 10 ft to 18 ft Telescoping Upright with Stops at every foot from 10 ft to 18 ft 5.4 lbs
B206 10 ft to 18 ft Telescoping Upright with Stops at every foot from 10 ft to 18 ft 4.8 lbs

Upright Extensions
Item # Specifications Weight
B301 2 ft Upright Extension 1.6 lbs
B302 4 ft Upright Extension 1.8 lbs
B303 6 ft Upright Extension 2.0 lbs
B304 8 ft Upright Extension 2.2 lbs
B305 10 ft Upright Extension 2.4 lbs

Drape Supports

Drape supports, or the curtain rods as most people refer to them, are the rods that connect to the uprights to hang your rod pocket drapes. The most commonly used drape supports are adjustable and always your best value as it gives you flexibility to adjust the width of the support within its range. We offer six different sizes of adjustable drape supports and one fixed length drape support that is 10' long.

Drape supports are all aluminum and are manufactured from high quality 6063-T-6 aluminum tubing and are produced to an exact specification and hardened to yield a Webster rating of 14. Uprights feature an extra heavy duty 0.65 wall thickness and each upright is inspected for fit and function. Each drape support is finished with a clear anodize process to protect your drapes from damage.

Note: Replacement Parts are available for all pipe and drape components to replace or repair lost or damaged pipe and drape components.

Drape Supports
Item # Specifications Weight
B400 3ft to 5ft Telescoping Drape Support with Button Stops @ 4ft & 5ft 2.2 lbs
B401 4ft to 7ft Telescoping Drape Support with Button Stops @ 5ft & 7ft 2.8 lbs
B402 6ft to 10ft Telescoping Drape Support with Button Stops @ 8ft & 10ft 4.0 lbs
B403 7ft to 12ft Telescoping Drape Support with Button Stops @ 8ft, 10ft & 12ft 4.6 lbs
B404 8ft to 14ft Telescoping Drape Support with Button Stops @ 10ft, 12ft & 14ft 5.0 lbs
B405 10ft to 18ft Telescoping Drape Support No Button Stops 6.5 lbs
B406 10ft Fixed Drape Support 4.0 lbs